The Aluminum Die Casting Base Housing, it is an customized auto part, it is produced by high pressure die casting process, the part is required to be as cast, so during the part development, the engineer should review the drawings very carefully to look into if all the required dimensions an……
[More] [inquiry]
Aluminum Die Casting Mount Bracket of Swing Arm, it is a part used on wiper system, the manufacturing technology is High Pressure Die Casting, a kind of cold chamber aluminum die casting, the material for this part is ADC-12, a Japanese standard aluminum. this material is supposed to co……
[More] [inquiry]
Aluminum Die Casting Mounting Bracket, this part carried die casting standard of Grade GB-CT4, the part has small wall thickness, meanwhile, the part have structure of big cavity, which usually easily cause problem of mold sticking, pull mark etc. The small wall thickness means the part prob……
[More] [inquiry]
Aluminum Die Casting Drive Arm Crank, this part is used as driven arm crank on the windscreen wiper, the carried die casting criterion for this part is Grade GB-CT4, in application, the part will rotate with the driven structure of the wiper, so the mechanical property should at least satisf……
[More] [inquiry]
Aluminum Die Casting Arm Channel, the part is a bracket for passing and fixing the wire of the windscreen wiper, the standard carried for the die casting work of this part is GBT6414-CT4, this part has a lot of hollow-out structure, which need not only one slide to form. This part ……
[More] [inquiry]
Aluminum Die Casting Housing of Motor Side, the part is a housing for DC motor on windscreen wiper system which is applied to bus, boat in daily life, the part is a cover, the mating part is the pivot housing 429-1040, in this part, there is a feature of rail, which is used for the slide of ……
[More] [inquiry]
Threaded Pivot Housing of Aluminum, the part is also a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part looks almost the same to the part number 421-1040 except the length of the two threaded pillar. It is almost 50 mm longer than pivot 4……
[More] [inquiry]
Double Shaft Pivot Housing, the part is also a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part is similar to the pivot housing 421-1034 but have two long pins, this pivot side housing have two long threaded pillars, from these two pi……
[More] [inquiry]
Aluminum Die Casting Shaft Housing, This part is a pivot housing for assembling the shaft, which is used on DC motor on wiper system, the part is very similar to pivot housing 421-1034, the difficulty of this part is the feature of the long threaded pillar, it is even longer than 421-10……
[More] [inquiry]
Aluminum Die Casting Pivot Housing, our factory have a couple of 280T die casting machines, the size and the weight of this part is very suitable for the machines. This part is a pivot housing for DC motor on wiper system, the difficulty of this part is the structure of the long threade……
[More] [inquiry]
The Die Casting Aluminum Mounting Head, the part is small, but similar to the other mounting head parts, it has a deep cavity, which is easier to make the part sticky to the mold, then during production, if the material sticked on the mold is not cleaned, it will damage the castings newl……
[More] [inquiry]
The Aluminum Windscreen Wiper Mount Head is a small part which is used as Mount head of windscreen wiper system on bus, boat and car etc. The technology for this part is high pressure aluminum die casting, the mold design is very important, according to our ISO/TS:16949 Certificate,&nb……
[More] [inquiry]
