Quality Aluminum Die Casting Motor Side Housing for Sale

Aluminum Die Casting  Motor Side Housing, the material of this part is ADC-12, the part is a housing for DC motor on windscreen wiper system which is used on bus, boat after assembly, the part is an end cover, work with a mating pivot housing, the DC motor run in these two housing. 

On this part, there are a lot of teeth. the clearance of the teeth is small, what's more, the permissible draft of the teeth is only 1 degree, there will be potential risk for failure of mold release.  The material of this part is ADC-12, it  a Japanese aluminum type. The material should conform to standard of JIS H 5302-2000, a very common material in high pressure die casting. The material is equivalent to Chinese aluminum alloy YL113, the corresponding standard is GB/T 15115-2009. And the material is also equal to A383, the criterion is ASTM B85-03 Standard Specification for Aluminum-Alloy Die Castings.

The part has request on surface finish of E-Coating to satisfy the daily application, so to test the density of the part is very important. , in engineering's work instruction, the operator should fracture the part and look into the section of the fracture to see if the particles is good and dense prior to production, ensure there is no big single porosity or a lot of continuous small porosity, or while e-coating, during process of curing in over under 170-200 degree temperature, the porosity existing internal will expand to get out, leading to big cosmetic issues on this part, such as bubble, pits etc. 

For this part, after die casting, the workshop will remove the gate by manual. Then flow to polishing process, polishing to remove the vestige of the gate.

Material: ADC-12
Cavity Number: 1
Process Technology: High pressure die casting, Cold Chamber
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Surface Finish: Polishing, Nyloy polishing the second time
Flow Processes: Die casting, Degate, De-slag, Deburr to remove the flash around the ejector pins, Polishing to remove the parting line, Nyloy polish to make the part have more beautiful appearance, High Precision CNC Lathe Machining in two times, E-coating, Cleaning, Packaging, Inland Shipping to the port as the trad term is FOB NINGBO
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection,  and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Auto Parts
Certificate: ISO/TS16949:2009
Lead Time: 30-35 days
Trade Term: FOB Ningbo