Quality Aluminum Die Casting BNK Knead Knock -YL102 for Sale

Aluminum Die Casting BNK Knead Knock -YL102, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is very small, at the smallest area, after machining, it is only about 1.5 mm. for the raw material as cast, the wall thickness of the small end is only 2 mm, the die casting criterion carried on this part is Grade GB-CT3, the general tolerance standard for the dimensions unspecified is ISO 2768-MK. What's more, this part has some form and location tolerance requirement, such as the rectangularity, the planeness, positioning degree. For the development of this part, in order to shorten the lead time, shorten the timing of validating, determine the best parameters for die casting process, the engineer kept following the whole die casting process. The main four parameter referred of die casting technology is press, speed, timing, temperature.  

The CNC machining work is finished on high precision machining center, we used BROTHER machining center, the accuracy can be up to 0.005 mm. The fourth rotary table we used is NIKKEN.  Prior to machining, the part will be shot peeninged, or called shot blasting, shot peening is to make the appearance of the part more consistency, eliminating the mark of deburring more or less. What's more, shot blasting also can make the mechanical property better.

The material required for this part is ADC-12, a Japanese standard aluminum, very common material applied in high pressure die casting. The material should conform to standard of JIS H 5302-2000.

Material: YL102
Cavity Number: 2
Process Technology: High pressure die casting, Cold Chamber
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Surface Finish: Polishing, shot blasting
Flow Processes: Die casting, Degating, Deburring to remove the flash around the ejector pins, Polishing to remove the parting line, Shot peening to make the part more consistency, High Precision CNC Lathe Machining, E-coating, Cleaning, Packaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection,  and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Auto Parts
Certificate:  IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo