Brilliance Customized extruded aluminum heatsink for led this part use ADC-12 as material, a kind of common material used in Extruded Aluminum Heatsink for Led Lamp, having good processability, for the physical property, this material have good thermal conductivity. Not only ……
[More] [inquiry]
Aluminum Casting ADC12 Cylinder head cover is a part applied to oil system, with the purpose to improve the stability, the comfort, the safety of driving.In order to increase the production efficiency, and ensure the control on such as the flash, the pin marks, and no appearance de……
[More] [inquiry]
Aluminum Casting of End Cover, this part is used as engine housing on the garden instrument facility, the part have 6 cavities, so on the mold, there will be many protrude from the surface, then while feeding the mold, as the injection gate is located at the bottom of the surface, so when the……
[More] [inquiry]
Machining Die Casting Lighting Parts for Heat Sink, Our Heatsink must have below standard. The Heatsink surface has no harmful substance volatilization, and has no harm to environment and human body. According to the test report of the national quality supervision and inspe……
[More] [inquiry]
Double shaft pivot bracket , the part is also a kind of pivot bracket on windscreen wiper system, which is applied to bigger buses, boat etc. The part is similar to the pivot bracket 421-1034 but have two long pins, this pivot side bracket has two threaded pillars, from these two pi……
[More] [inquiry]
Aluminum Die Casting Transmission Housing, it is an auto part, which is applied to transmission system, it the housing of the automotive gearbox. The estimated annual usage is 250k pieces. Theoretically for such large demand, the cavity number of the mold for this part should be more than 2. ……
[More] [inquiry]
The Aluminum Die Casting Hanger of Prototype is a part applied to Hanger system, with the purpose to make the stability, the comfort, the safety of driving best. The part is auto part for famous motor corporation Chrysler-Fiat, so the development is strict, prior to mass production, the customer r……
[More] [inquiry]
High precision Aluminum Casting of LED Lighting, this part use ADC-12 as material, a kind of most common material, having good processability, for the physical property, this material have good thermal conductivity. At present, in die casting process, ther……
[More] [inquiry]
High Pressure Aluminum Die Casting part for Gear Box The part has requirement of powder coating treatment, so the density of the part is very important, unqualified part usually have a lot of void inside. So the mold design is very important, such as the layout of the location of the ……
[More] [inquiry]
The Aluminum Die Casting Hanger of Prototype is a part applied to Hanger system, with the purpose to make the stability, the comfort, the safety of driving best. The part is auto part for famous motor corporation Chrysler-Fiat, so the development is strict, prior to mass production, the customer r……
[More] [inquiry]
The Aluminum Die Casting Hanger of Prototype is a part applied to Hanger system, with the purpose to make the stability, the comfort, the safety of driving best. The part is auto part for famous motor corporation Chrysler-Fiat, so the development is strict, prior to mass production, the customer ……
[More] [inquiry]
High Pressure Aluminum Die Casting part for Gear Box is a part which is used as Mount head on Gearbox system. The technology for this part is high pressure die casting. Our factory specializes in this industry for more than 16 years. The material for this part is ADC-12, a most co……
[More] [inquiry]
